High Sensitivity Single Loop/Channel Vehicle Detector for Parking Access Control
Specifications
Compatible with parking management system
Easy installation and operation
Factory price and fast shipping
Introduction:
Single/double vehicle loop detector is used for wherever vehicles have to detected.
For example for monitoring and safe-guarding accessways or for counting vehicles.
The output singnal can be used for controlling door and barrier gate drive mechanisms, operation barriers,
controlling traffic light system or activaticing card dispensers in parking management system.
connects one inductive loop (single channel)
connects two indutive loop (double channel)
Application Scope
Parking lot entrances Vehicle detection
Parking lot space information acquisition system
Electronic police traffic lights snap shot system
Traffic monitoring system
Standard Features:
1) Reset Switch : The reset switch enables the detector to be manually reset during
commissioning and testing . This results in the detector re-tuning the sensing loop and
becoming ready for vehicle detection
2) Selectable Pulse Time : This feature sets the length of time that the pulse relay will be
energized for 1 Second or 0.5 Seconds
3) Pulse Relay Selection : The Pulse Relay may be configured to energize on detection of a
vehicle or when the vehicle leaves the loop
4) Sensitivity Boost : This feature sets the undetect level to maximum sensitivity and is used
to prevent loss of detection of high-bed vehicles
5) Switch Selectable Sensibility : 4 sensitivity setting are available on the switches to allow
flexibility in configuration
6) Switch Selectable Frequency : 4 frequency settings are available to prevent cross-talk
between adjacent loops
7) Filter Option : This option is used to provide a delay between detection of the vehicle and
switching of the output relay . This relay is normally used to prevent false detection of
small or fast moving objects
8) Permanent Presence Option : This feature ensure detection of the vehicle will be maintained
when the vehicle is parked over the loop for extended periods .
Technical parameters:
Model :MX-410
Single channel loop detector
Dimension: L110mm x W37mm x H75 mm
Power supply: DC12V/DC24V or AC220V/AC110V for optional
Power consumption: 5W as default
Output Mode: Two relay
Output signal type: exist pulse
Frequency Adjustment: 2
Operating temperature: -30 degree to 70 degree
Operating frequency: 20KHz to 170KHz
Installation: DIN lead rail, Connection: 11-PIN socket
Loop connection wiring: max x 100m, twisted at least 20 times per meter
Total resistance: less than 10ohm
Automatic calibration time: 2s to 5s
Sensitivity:3 grades adjustable
Reaction time: 10ms (fastest)
Shell: PC+ABS engineering plastics
Net weight: 200g
Product Tags:
|
|
High Sensitivity Single Loop / Channel Vehicle Detector for Parking Access Control Images
|
